Enter your registered email:
Indtast ny adgangskode:

Polycon Industrial Spray Gun

The Polycon Spray Gun uses a selection of plug-in nozzles and plug-in containers to spray a wide variety of difficult to spray materials. Resins, gelcoat and adhesives as well as ordinary paints or Release agents can all be sprayed with the POLYCON gun.

Polythene containers and short, straight fluid passages virtually eliminate clean up and clogging problems even for fast re-acting resins. Operating on air pressure from 3.5 bars, rates of application can be very slow for fine work, up to 7 bars for fast spraying of large structures. The plug-in containers allow for quick change of colours or materials.

​Working with the Polycon means:

  • ​Low cost

  • Industry Standard for 20 Years

  • Fast, Uniform Coating

  • Easy to clean*

  • Easy to Use


​Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter.

Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer.


Spray Gun                                     Containers:

​Material: Aluminium Alloy             1.5 Litre (Art.no. PO026-0305)

Weight: 0,5 kg.                               2,5 Liter (Art no. PO026-0326)

Air Connection: 1/4" BSP                Lid for 1,5 & 2,5 Litre (Art.no. PO026-0325) & (Art.no. PO26-0300)

Air Requirements (For Gelcoat Spaying)                Rate of Apllication:

​Pressure: 3.5 to 7.0 bar                                           For Gelcoat:   Up to 3.5 kg./min.

Volume: 400 til 800 litres/min

Easy to Clean:

  • Pull out nozzle and clean with solvent (e.g. Acetone)

  • Containers and lids are reusable

  • Break free Hardened gelcoat from Container

For further information please contact us (e.g. How-to-use, spareparts no. etc.)


Granudan ApS • Knud Bro Alle 4 • DK-3660 Stenløse • Danmark

Europe: +45 44 84 37 56 • China: +86 139 405 96480 • USA: +1 719 229 1981

e-mail: sales@granudan.com


Our company is credit worthy according to Bisnode's credit assessment system that is based on a number of decision rules. This credit rating is updated on a daily basis, and always shows the current rating and date.